Bu sayfa, kılavuzun PDF dosyasındaki metnin tamamıdır (sayfa sayfa). Görseller ve çizimler için PDF'i açın. — sibastore.com
Battery Compatibility Overview This document lists the compatible batteries with GoodWe storage inverters, consisting in 4 system types: 1) Low-voltage energy storage systems 2) High-voltage energy storage systems 3) Commercial and industrial energy storage systems 4) High-voltage Energy Storage Systems (for U.S only). Only batteries listed in this document are approved for connection to GoodWe storage inverters according to GoodWe Limited Warranty. In addition to the batteries listed in this document, there are some batteries that follow the GOODWE CAN communication protocol that are not listed in this document, if you need to get the matching information for these batteries, please consult GOODWE's technical service personnel. 1) Low-voltage Energy Storage Systems Battery Battery Battery Brand Series Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 SECU-A SECU-A5.4L ● ● ● ● ● GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice. LX U5.4-L*1 ● ● ● ● ● ● LX U5.4-20*2 ● ● ● ● ● ● LX U5.0-30*4 ● ● ● ● ● ● ● ● ● ● Lynx Home U GOODWE LX A5.0-10*3 ● ● ● ● ● ● LX A5.0-30*5 ● ● ● ● ● ● ● ● GW14.3-BAT-LV-G10*6 ● ● ● ● ● GW16.1-BAT-LV-G10*7 ● ● ● ● ● Note: The Lynx Home A/U series batteries do not support parallel connections between different models. ES/EM/SBP/BP: *1. ARM firmware versions 11 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. *4. ARM firmware versions 34 and above are required for compatibility. *4. Lynx Home U-30 model batteries are compatible with ES/EM/SBP/BP series inverters. The BMS version must be ≥01, i.e., batteries manufactured after April 2025. ES G2/SBP G2: *2. ARM firmware versions 02 and above are required for compatibility. *3. ARM firmware versions 07 and above are required for compatibility. *4. ARM firmware versions 13 and above are required for compatibility. *5. ARM firmware versions 09 and above are required for compatibility. ES uniq 3-12K: *4. ARM firmware versions 15 and above are required for compatibility. *5. ARM firmware versions 09 and above are required for compatibility. *6. ARM firmware versions 14and above are required for compatibility. *7. ARM firmware versions 15 and above are required for compatibility. EO 3.5-6K: *1. ARM firmware versions 03 and above are required for compatibility. ET LV: *7. ARM firmware versions 02 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 Lynx Home A Battery-Box Pro Series*1 - ● ● ● ● ● Battery-Box Res Series*1 - ● ● ● ● ● Battery-Box LV Series*2 - ● ● ● ● ● Battery-Box Premium LVL*2 LVL 15.4 ● ● ● ● ● Battery-Box Premium LVS Series*2 - ● ● ● ● ● BatteryBox LV5.0*3 LV5.0 ● ● ● ● BatteryBox LV5.0+*4 LV5.0+ ● ● ● ● ● BatteryBox LV5.0 + (2026)*5 LV5.0 + (2026) ● ● ● ● ● ES/EM/SBP/BP: *1. ARM firmware versions 00 and above are required for compatibility. *2. ARM firmware versions 07 and above are required for compatibility. ES G2/SBP G2: *3. ARM firmware versions 09 and above are required for compatibility. *4. ARM firmware versions 09 and above are required for compatibility. *5. ARM firmware versions 09 and above are required for compatibility. ES uniq 8-12kW: *3. ARM firmware versions 10 and above are required for compatibility. *4. ARM firmware versions 10 and above are required for compatibility. *5. ARM firmware versions 10 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 BYD RESU 3.3*1 ● ● ● ● RESU 6.5*1 ● ● ● ● ● RESU 10*1 ● ● ● ● ● RESU 12*2 ● ● ● ● ● RESU 13*2 ● ● ● ● ● RESU 6.4 EX*1 ● ● ● ● ● ES/EM/SBP: *1. ARM firmware versions 00 and above are required for compatibility. *2. ARM firmware versions 07 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 LG RESU LV Series US2000 Series*1 US2000 ● ● ● ● ● US3000 Series*2 US3000 ● ● ● ● ● US2000C Series*1 US2000C ● ● ● ● ● US3000C Series*2 US3000C ● ● ● ● ● Force L1 Series*2 Force-L1 ● ● ● ● ● Force L2 Series*2 Force-L2 ● ● ● ● ● US5000 Series*3 US5000 ● ● ES/EM/SBP/BP: *1. ARM firmware versions 00 and above are required for compatibility. *2. ARM firmware versions 07 and above are required for compatibility. *3. ARM firmware versions 00 and above are required for compatibility. PYLON sales@goodwe.com www.goodwe.com Inverter Series
Battery Compatibility Overview 1) Low-voltage Energy Storage Systems Inverter Series ES EM SBP ES G2 SBP G2 ES Uniq Battery Battery Battery Brand Series Model *1 DYNESS-LV x1 ● ● ● DYNESS-LV x2 ● ● ● DYNESS-LV x3 ● ● ● DYNESS-LV x4 ● ● ● DYNESS-LV Series *1 POWERBOX F-2.5 ● ● ● POWERBOX F-5.0 ● ● ● POWERBOX F-7.5 ● ● ● POWERBOX F-10.0 ● ● ● POWERBOX F Series DYNESS DL5.0C*2 ● ● ● DL5.0X*3 ● ● A48100*4 ● ● POWER BOX G2*5 POWER BOX G2 ● ● ● POWER BRICK*6 POWER BRICK ● ● ● ES/EM/SBP/BP: *1. ARM firmware versions 07 and above are required for compatibility. ES G2/SBP G2: *2. ARM firmware versions 06 and above are required for compatibility. *3. ARM firmware versions 07 and above are required for compatibility. *4. ARM firmware versions 07 and above are required for compatibility. *5. ARM firmware versions 08 and above are required for compatibility. *6. ARM firmware versions 08 and above are required for compatibility. ES Uniq: *5. ARM firmware versions 09 and above are required for compatibility. *6. ARM firmware versions 09 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice. DYNESS-LV Series *1 LBS051100A-A02 ● LBS051100A-A03 ● LBS051100A Series OLOID *1 LBS051200A-A02 ● LBS051200A-A03 ● LBS051200A Series ES: *1. ARM firmware versions 12 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Soluna 4K Pack ● ● ● Soluna 5K Pack ● ● ● Soluna EOS 5K Pack ● ● ● Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Soluna LV (48V) Battery Series *2 ● ● ● Smile5-BAT Series SMILE5-BAT *2 ● ● ● Smile-BAT-10.3P Smile-BAT-10.1P Smile-BAT Series *2 ● ● ● Smile-BAT-13.3P *1 ALPHA *3 ● ● ● M48112-P Series M48112-P *3 ● ● ● M48100-P Series M48100-P *3 ● ● ● ES/EM/SBP/BP: *1. CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters. A matching solution provided by ALPHA-ESS is required. *2. ARM firmware versions 10 and above are required for compatibility. *3. ARM firmware versions 11 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Firefly-3.6K ● ● ● Firefly-7.2K ● ● ● Firefly-10.8K ● ● ● Firefly-14.4K ● ● ● Firefly-18.0K ● ● ● Firefly-21.6K ● ● ● Firefly-25.2K ● ● ● *1 Tecloman Firefly Series ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq UZENERGY L051100-A Series L051100-A *1 ● ● ● ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility. sales@goodwe.com www.goodwe.com
Battery Compatibility Overview 2) High-voltage Energy Storage Systems Inverter Series ET (5-10kW)* EH** BT BH EHB ET (15-30kW) ET G2 Battery Battery Battery Brand Series Model LX F6.6-H ● ● ● ● ● ● ● LX F9.8-H ● ● ● ● ● ● ● LX F13.1-H ● ● ● ● ● ● ● LX F16.4-H ● ● ● ● Lynx Home F *1 *2 Lynx Home F PLUS+ LX F6.4-H-20*7 ● ● ● LX F9.6-H-20 ● ● ● ● ● ● ● LX F12.8-H-20 ● ● ● ● ● ● ● LX F16.0-H-20 ● ● ● ● ● ● ● LX F19.2-H-20 ● ● ● ● ● ● ● LX F22.4-H-20 GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice. *3 Lynx Home F G2 *8 ● ● ● ● ● ● ● LX F25.6-H-20 ● ● ● ● LX F28.8-H-20 ● ● Lynx C *4 GW60KWH-D-10 ● Lynx D*5 LXD5.0-10 ● ● ● ● ● ● GW5.1-BAT-D-G20 ● ● GW5.1-BAT-D-G21 ● ● GW8.3-BAT-D-G20 ● ● GW8.3-BAT-D-G21 ● ● GW6.0-BAT-D-G20 ● ● GW9.0-BAT-D-G20 ● ● GOODWE Lynx D G2*9 GW25.6-BAT-I-G10 ● GW30.7-BAT-I-G10 ● GW35.8-BAT-I-G10 ● GW40.9-BAT-I-G10 ● GW46.0-BAT-I-G10 ● GW51.2-BAT-I-G10 ● GW56.3-BAT-I-G10 ● GW61.4-BAT-AC-G10 ● GW92.1-BAT-AC-G10 ● GW102.4-BAT-AC-G10 ● GW112.6-BAT-AC-G10 ● BAT*6 *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 19 and above are required for compatibility. *2. ARM firmware versions 23 and above are required for compatibility. *3. For compatibility, the ET/BT series requires ARM25 and DSP09 versions and above; the EHB series requires ARM25 and DSP version 03 and above; the EH/ BH series requires ARM25 and DSP version 07 and above. *5. For compatibility, the ET/BT series requires ARM28 and DSP version 12 and above. *5. For compatibility, the EH/BH series requires ARM29 and DSP version 08 and above. *8. The EHB series requires firmware version ARM32/DSP 02 or higher to be compatible with the LX F22.4-H-20 model. *8. The EH/BH series requires firmware version ARM 32/DSP 10 or higher to be compatible with the LX F22.4-H-20. ET (15-30kW)/ET G2 *3. For compatibility, the ET (15-30kW) Series requires ARM07 and DSP version 06 and above. *4. For compatibility, the ET (15-30kW) series requires ARM07 and above. *5. For compatibility, the ET(15-30kW) series requires ARM 09 and DSP version 08 and above. *3. ET (15-30kW) matching Lynx Home F G2 Series LX F9.6-H-20 requires ARM09 and DSP08 and above. *7. Lynx Home F G2 Series LX F6.4-H-20 only supports GW12KL-ET and GW18KL-ET models in the ET (15-30kW) series. *6. For compatibility, the ET (15-30kW) series requires ARM13 and above. *9. For compatibility, the ET (15-30kW) series requires ARM 18 and above. *9. For compatibility, the ET G2 series requires ARM 18 and above. sales@goodwe.com www.goodwe.com
Battery Compatibility
Overview
2) High-voltage Energy Storage Systems
Inverter Series
ET (5-10kW)* EH** BT BH EHB ET (15-30kW) ET G2
Battery
Battery
Battery
Brand
Series
Model
Battery-Box HV Series*1
-
●
●
●
●
HVM 8.3
●
●
●
HVM 11.0
●
●
●
●
●
●
●
HVM 13.8
●
●
●
●
●
●
●
HVM 16.6
●
●
●
●
●
●
●
HVM 19.3
●
●
●
●
●
●
●
HVM 22.1
●
●
●
●
●
●
●
Battery-Box Premium HVM
*2
*2
HVS 5.1
●
●
●
●
●
●
●
HVS 7.7
●
●
●
●
●
●
●
HVS 10.2
●
●
●
●
●
●
●
HVS 12.8
●
●
●
●
Battery-Box Premium HVS
GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice.
HVM+ 11.0
●
●
HVM+ 13.8
●
●
HVM+ 16.6
●
●
HVM+ 19.3
●
●
HVM+ 22.1
●
●
*4
BYD
Battery-Box HVM+
HVB 11.8
●
HVB 14.8
●
●
HVB 17.8
●
●
HVB 20.7
●
●
HVB 23.7
●
●
HVB 25.7
●
●
HVB 29.6
●
●
*5
Battery-Box HVB
*6
HVS+ 5.1
●
●
HVS+ 7.7
●
●
HVS+ 10.2
●
●
HVS+ 12.8
●
●
*. Including ET Series: ET PLUS+, ET PLUS+ (16A)
**.Including EH Series :EH PLUS
ET/EH/BT/BH/EHB:
*1. ARM firmware versions 07 and above are required for compatibility.
*2. ARM firmware versions 11 and above are required for compatibility.
ET15-30kW:
*2. ARM firmware versions 02 and above are required for compatibility.
BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.
*2.The maximum charge/discharge current of single-cluster HVS battery is 25A, ET30kW with single-cluster HVS battery will not be able to reach the nominal maximum
charge/discharge power of the inverter.ET15-30 series with HVM battery maximum charging and discharging current of 40A.
*2. BYD HVM 11.0 is used with ET15-30kW inverters, inverter version must be ARM 09/DSP08 or above.
BYD battery multi-tower parallel explanation:
*4. For HVM+ multi-tower system parallel connections, the BYD 70A combiner box is required.
*5. For HVB multi-tower system parallel connections, the BYD 70A combiner box is required.
*6. For HVS+ multi-tower system parallel connections, the BYD 70A combiner box is required.
Battery Brand
Battery Series
Battery Model
ET (5-10kW)*
EH**
BT
BH
EHB
ET (15-30kW)
ET G2
Battery-Box HVS+
*1
FLEX 8.6
FLEX 12.9
FLEX 17.2
RESU Type-R Series
RESU10H_Type-R
●
RESU FLEX Series
LG
*2
RESU10H Prime
●
RESU16H Prime
●
**.Including EH Series :EH PLUS
EH/BH/EHB:
*1. Only compatible with ET PLUS+ Series. ARM firmware versions 23 and above are required for compatibility.
*2. ARM firmware versions 20 and above and DSP versions 02 and above are required for compatibility.
Battery Brand
Battery Series
Battery Model
ET (5-10kW)*
EH**
BT
BH
EHB
ET (15-30kW)
ET G2
RESU Prime Series
Powercube H1 Series*1
POWERCUBE-H1-48
●
●
●
Force H1 Series*2
Force-H1
●
●
●
●
Force H2 Series
Force-H2
●
●
●
●
Force H3 Series*3
Force-H3
●
●
●
●
PYLON
**.Including EH Series :EH PLUS
EH/BH/BT:
*1. ARM firmware versions 07 and above are required for compatibility. Please note that the nominal voltage of POWERCUBE-H1-48 Series must be within the Battery Voltage
Range of GoodWe inverters. Maximum 8 units for EH/BH.
*2. ARM firmware versions 14 and above are required for compatibility.
*3. ARM firmware versions 14 and above are required for compatibility. Please note that the nominal voltage of Force H3 Series must be within the Battery Voltage Range of
GoodWe inverters. Maximum 4 units for EH/BH.
ET G2:
*3. Please note that the nominal voltage of Force H3 Series must be within the Battery Voltage Range of GoodWe inverters. Maximum 6 units for ET G2.
sales@goodwe.com www.goodwe.comBattery Compatibility Overview 2) High-voltage Energy Storage Systems Inverter Series EH** BT BH EHB ET (15-30kW) ET G2 Battery Battery Battery Brand Series Model Tower T7 ● ● ● Tower T10 ● ● ● ● ● *1 Tower Series Tower T14 ● ● ● ● ● Tower T17 ● ● ● Tower T21 ● ● GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice. Tower Pro TP7 ● DYNESS Tower Pro TP11 ● ● ● Tower Pro Series*2 Tower Pro TP15 ● ● ● Tower Pro TP19 ● ● ● Tower Pro TP23 ● ● STACK100*3 STACK100 ● STACK100 Pro STACK100 Pro ● **.Including EH Series :EH PLUS EH/BH/BT: *1. ARM firmware versions 10 and above are required for compatibility. *2. ARM firmware versions 10 and above are required for compatibility. ET G2: *1. ARM firmware versions 13 and above are required for compatibility. *2. ARM firmware versions 13 and above are required for compatibility. ET 15-30kW: *1. ARM firmware versions 08 and above are required for compatibility. *2. ARM firmware versions 08 and above are required for compatibility. *3. ARM firmware versions 08 and above are required for compatibility. Note that ET15-30kW only supports 5-13 modules of STACK100 batteries, the inverter will be damaged if the number of batteries does not match. Battery Brand Battery Series Battery Model EH** BT BH EHB ET (15-30kW) ET G2 Soluna 7K Pack HV ● ● Soluna HV Battery Series *1 Soluna 10K Pack HV ● ● ● Soluna 15K Pack HV ● **.Including EH Series :EH PLUS EH/BH/EHB/BT: *1. ARM firmware versions 10 and above are required for compatibility. Battery Brand Battery Series Battery Model EH** BT BH EHB ET (15-30kW) ET G2 Mint-JKE5 ● ● Mint-JKE10 ● ● iPotisEdge Mint-JKE *1 Mint-JKE15 ● ● ● Mint-JKE20 ● ● ● **.Including EH Series :EH PLUS EH/BH/EHB/BT: *1. ARM firmware versions 12 and above are required for compatibility. sales@goodwe.com www.goodwe.com
Battery Compatibility Overview 3) Commercial and Industrial Energy Storage Systems Battery Battery Battery Brand Series Model ETC BTC ET (25-50kW) ET 50KLV ET (75-100kW) ETR 50/75KLV ETR 75-125kW ET G3 18-30KLV ET G3 25-50kW GW60KWH-D-10 GW100KWH-D-10 ● GW100KWH-D- 10(Extension) ● *1 Lynx C *2 ● ● ● LX C 101-10 LX C 120-10 *2 ● ● ● LX C 138-10 ● ● ● GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice. LX C 156-10 ● ● ● GW25.6-BAT-I-G10 ● ● ● GW30.7-BAT-I-G10 ● ● ● GW35.8-BAT-I-G10 ● ● ● ● GOODWE GW40.9-BAT-I-G10 ● ● ● ● ● GW46.0-BAT-I-G10 ● ● ● ● ● GW51.2-BAT-I-G10 ● ● ● ● ● BAT*3 GW56.3-BAT-I-G10 ● ● ● ● GW61.4-BAT-AC-G10 ● ● ● GW92.1-BAT-AC-G10 ● ● ● GW102.4-BAT-AC-G10 ● ● ● GW112.6-BAT-AC-G10 ● ● ● GW208.9-BAT-LC-G10 ● ● GW261.2-BAT-LCD-G10 ● ETC 50kW/BTC 50kW: *1. EMS firmware versions 02 and above are required for compatibility. ETC 100kW: *1. EMS firmware versions 00 and above are required for compatibility. ET (25-50kW): *2. ET 50kW with Lynx C-Series LX C101-10, LX C120-10 cannot reach the maximum power of the inverter. ET (25-50kW): *3. For compatibility, the ET (25-50kW) series requires ARM10 and above. ET (25-50kW)/ET (75-100kW): *3. The BAT series GW25.6-BAT-I-G10, GW30.7-BAT-I-G10, GW35.8-BAT-I-G10 and GW61.4-BAT-AC-G10 models paired with ET (25-50kW) cannot achieve full power output from the inverter. *3. The BAT series GW40.9-BAT-I-G10, GW46.0-BAT-I-G10, GW51.2-BAT-I-G10, GW56.3-BAT-I-G10 and GW61.4-BAT-AC-G10 models paired with ET (75-100kW) cannot achieve full power output from the inverter. ET 50KLV: *3: The BAT series GW35.8-BAT-I-G10, GW40.9-BAT-I-G10 and GW46.0-BAT-I-G10 models paired with ET 50KLV cannot achieve full power output from the inverter. Battery Battery Series Battery Model ETC BTC ET (25-50kW) ET 50KLV ET (75-100kW) ETR 50/75KLV ETR 75-125kW ET G3 18-30KLV ET G3 25-50kW Brand LITE 30 ● LITE 37.5 ● LITE 45 ● BYD BATTERYMAX *1 LITE LITE 52.5 ● LITE 60 ● LITE 67.5 ● ET (25-50kW): *1. ARM firmware versions 08 and above are required for compatibility sales@goodwe.com www.goodwe.com Inverter Series
Battery Compatibility Overview 4) High-voltage Energy Storage Systems (for U.S only). Battery Brand Battery Series Battery Model Inverter Series A-ES A-BP ES-US20 SBP-US20 SECU-S13 ● ● SECU-S15 ● ● SECU-S18 ● ● SECU-S20 ● ● *1 SECU-S GoodWe LX F9.6-30 ● ● ● ● LX F12.8-30 ● ● ● ● LX F16.0-30 ● ● ● ● LX F19.2-30 ● ● ● ● *2 Lynx Home FH series US GoodWe Battery Compatibility Overview-20261022-EN-V029.1 Information may be subject to change without notice. A-ES/A-BP: *1. ARM firmware versions 14 and above are required for compatibility. ES-US20/SBP-US20: *2. ARM firmware versions 03 and above are required for compatibility. A-ES/A-BP: *2. ARM firmware versions 24 and above and DSP versions 07 and above are required for compatibility. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 HVL 12.0 ● ● HVL 16.0 ● ● HVL 20.0 ● ● HVL 24.0 ● ● HVL 28.0 ● ● HVL 32.0 ● ● *1 BYD Battery-Box Premium HVL A-ES/A-BP: *1. ARM firmware versions 11 and above are required for compatibility. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 LBS102100A Series*1 LBS102100A ● ● LBS153100A Series*1 LBS153100A ● ● LBS205100A Series*1 LBS205100A ● ● OLOID A-ES/A-BP: *1. ARM firmware versions 14 and above are required for compatibility. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 *1*2 Soluna 7K Pack HV ● ● ● ● Soluna 10K Pack HV ● ● ● ● Soluna 15K Pack HV ● ● ● ● Soluna HV Battery Series A-ES/A-BP: *1. ARM firmware versions 10 and above are required for compatibility. *2. Soluna HV does not have UL9540 certificate. ES-US20/SBP-US20 *1. ARM firmware versions 07 and above are required for compatibility. *2. Soluna HV does not have UL9540 certificate. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 RESU Type-R Series*2*3 RESU10H_Type-R ● ● LG *1*4 RESU10H Prime ● ● ● ● RESU16H Prime ● ● ● ● RESU Prime Series A-ES/A-BP/ES-US20/SBP-US20: *1. ARM firmware versions 20 and above and DSP versions 05 and above are required for compatibility. *2. When A-BP is compatible with LG RESU HV Series, the micro-grid applications are not supported. *3. When compatible with LG RESU, the following precautions should be noted: 1) Connection of RESU10H Type-R batteries in parallel is not supported. 2) For first inverter operation with LG battery, the inverter must be powered by the grid for the LG battery to be activated. 3) LG RESU10H Type-R battery Max discharge power is 5kW. Please ensure backup load peak power does not exceed 5kVA in backup mode. Loads with large inrush current (such as inductive loads including motors) may lead to output failure on backup side. 4) Depending on real-time battery condition, such as SOC, battery temperature etc, the battery output power may not be able to support backup load, which could lead to system failure. If this occurs, both battery and backup supply will cease. Power will resume if there is solar power available. 5) LG battery needs time to switch from charge to discharge up to the preset power. Quickly switching from on-grid mode to backup mode could fail if backup load power is higher than the max power ramp-up the battery can sustain within a limited time. *4. ARM firmware versions 05 and above and DSP versions 02 and above are required for compatibility. sales@goodwe.com www.goodwe.com