Service_manual_of_R32_Pular_Pg88-101

Bu sayfa, kılavuzun PDF dosyasındaki metnin tamamıdır (sayfa sayfa). Görseller ve çizimler için PDF'i açın. — sibastore.com

Sayfa 1

Service Manual
11. Removal Procedure

Step
Procedure

    7.Remove panel

a
Remove 3 screws fixing evaporator assy.

b

At the back of the unit, Loosen the clasp of the 
connection pipe clamp and then remove the 
connection pipe clamp.

First remove the left side of evaporator from
the groove of bottom shell and then remove
the right side from the clasp on the bottom
shell.

c

Adjust the position of connection pipe on evaporator 
slightly and then lift the evaporator upwards to 
remove it.

d

88
Installation and Maintenance

Clasp

Connection pipe

Sayfa 2

Service Manual
11. Removal Procedure

Step
Procedure

   8. Remove motor and cross flow fan

a
Remove 3 screws fixing motor clamp and then remove 
the motor clamp.

Loose the screws (2-3 circles) used for fixing the
cross flow fan, pull right to pull out the motor.
b

    9. Remove swing motor

Screw off the screws that are locking the swing
motor and take the motor off.

89
Installation and Maintenance

Screw

Screw

Screws

Sayfa 3

11.2 Removal Procedure of Outdoor Unit
Caution: discharge the refrigerant 
completely before removal.

7/9K
NOTE:Take 7K for example.

90
Installation and Maintenance

Service Manual

Sayfa 4

Service Manual

91
Installation and Maintenance

Sayfa 5

Service Manual

92
Installation and Maintenance

Sayfa 6

Service Manual

93
Installation and Maintenance

Sayfa 7

18K

Step
Procedure

    1. Before disassembly

   2. Remove valve cover

Remove the connection screw and then remove the 
valve cover.

   3. Remove big handle

Remove the connection screw and then remove the big 
handle.

94
Installation and Maintenance

Service Manual

valve cover

big handle

Sayfa 8

Service Manual

Step
Procedure

    4. Remove top cover

Remove connection screws connecting the top panel 
with the front panel and the right side plate, and then 
remove the top panel.

   5. Remove grille

Remove connection screws between the front grille and 
the front panel. Then remove the grille.

    6. Remove front panel

Remove connection screws connecting the front panel 
with the chassis and the motor support and then 
remove the front panel.

95
Installation and Maintenance

top cover

grille

front panel

Sayfa 9

Step
Procedure

   7. Remove right side plate

Remove connection screws connecting the right side 
plate with the valve support and the electric box. Then 
remove the right side plate.

   8. Remove the nut and gasket on the blade and then
       remove the axial flow blade

Remove the nut and gasket on the blade and then 
remove the axial flow blade.

    9. Remove motor and motor support

Remove the tapping screws fixing the motor and 
disconnect the leading wire insert of the motor. Then 
remove the motor.
Remove the tapping screws fixing the motor support 
and lift the motor support to remove it.

96
Installation and Maintenance

Service Manual

right side plate

gasket

nut

axial flow

motor

motor support

Sayfa 10

Service Manual

Step
Procedure

    10. Remove Electric Box Assy

Remove screws fixing the electric box subassembly; 
loosen the wire bundle and unplug the wiring terminals. 
Then lift the electric box to remove it.

    11. Remove isolation sheet

Remove the screws fixing the isolation sheet and then 
remove the isolation sheet.

    12. Remove 4-way valve assy and cut-off valve

Unsolder the welding joints connecting the 4-way valve 
assy and cut-off valve, remove the 4-way valve and cut-
off valve.
Note:
Before unsoldering the welding joint, wrap the 4-way 
valve with a wet cloth completely to avoid damage to 
the valve caused by high temperature.

97
Installation and Maintenance

Electric Box Assy

isolation sheet

4-way valve

Sayfa 11

Step
Procedure 

    13. Remove left side plate

Remove the screws fixing the left side plate and then 
remove the left side plate.

     14. Remove condenser sub-assy

Remove the screws fixing the Remove condenser sub-
assy and then remove the Remove condenser sub-
assy.

     15. Remove compressor

Remove the 3 foot nuts on the compressor and then 
remove the compressor.

98
Installation and Maintenance

Service Manual

left side plate

condenser sub-assy

compressor

foot nuts

Sayfa 12

Service Manual

21/24K

99
Installation and Maintenance

, 

Sayfa 13

Service Manual

100
Installation and Maintenance

Sayfa 14

Service Manual

.

101
Installation and Maintenance